Beschreibung
Becker Roller Shutter Motor L120-11-E25 120Nm NHK
2120 140 003 0 / 2120 140 006 0
- Becker roller shutter motor
- Recommended application: Roller shutters and roller doors
- No radio
- With manual override connection
- Electronic limit switch-off
- Suitable for winding shafts from Ø 63mm
- Obstacle detection: Switches off in the event of obstacles (e.g. freezing) and torque increase
- Intelligent installation management allows for quick limit position adjustments during installation
- Limit position setting: Automatic detection with existing end stops
- Automatic curtain length compensation: Elongation of the curtain is automatically detected and corrected by the drive
- Limit position status indicator: The drive indicates the absence of a limit position with a brief travel interruption
- Parallel switching possible
- Installation exclusively with rigid shaft connectors
- Motor protected against overheating
- Suitable for right-hand and left-hand installation
- Suitable for: SW70
- Nominal torque: 120Nm
- Nominal speed: 11 rpm
- Nominal voltage: 230 V
- Frequency: 50Hz
- Power consumption: 435W
- Current consumption: 1.90A
- Outer diameter: 58mm
- Protection class: IP44
- Frequency: 50Hz
- Weight: 5.10kg
- Connection cable: 0.5m length in black
- Total length: 804mm
- Made in Germany
Scope of delivery: 1 motor with connection cable
